XYZ Racing Drift Spec Coilovers — Cmc J SPACE (OE Lower 30mm) 2024-2026

The Cmc J Space sits in an awkward place for anyone trying to throw it sideways on factory dampers – soft body control, a tall OE ride height, and a chassis that wants to roll onto its outside corner the moment you provoke it. The XYZ Racing Drift Spec coilover is built for exactly that problem: keeping the body flat and the rear predictable when you’re committed past the point of grip. This is a competition-focused setup, not a fast-road compromise.

Drop the J Space 30mm below stock, give the front a measured weight transfer onto the outside tyre, and the car stops fighting the entry and starts answering it. That is what the Drift Spec is engineered to deliver on the CM01 platform across the 2024-2026 build window.

What this coilover does for your 2024-2026 Cmc J Space

The Drift Spec calms the J Space’s high-roll-angle behaviour where stock dampers run out of travel and the chassis pogos mid-corner. Stiffer spring rates paired with the lower 30mm ride height drop the centre of gravity and load the front axle harder under turn-in, so the rear unloads cleanly when you ask for angle. Bump stroke is set up to keep the inside-rear tyre planted at full lock rather than skipping, which is where most OE-damped drift attempts come undone. On a transition you’ll feel the body settle quicker between flicks, and the steering response sharpens enough that small inputs hold the line instead of needing constant correction. Brake stability into entry also tightens up, because the nose no longer dives into the bump stops before you’ve finished setting the angle.

About the Drift Spec coilover

The Drift Spec is XYZ Racing’s dedicated drift-competition damper, not a re-badged track kit. Construction follows the same monotube architecture XYZ uses across its racing range, but the valving and spring choices are specific to drift duty: high-speed cornering stability with the body controlled through aggressive angle and counter-steer transitions. Lowering the ride height with the kit’s adjustable spring perches sets the geometry into a working window where the chassis loads onto the outside tyre on entry and the rear breaks away in a controlled, manageable slide rather than a snap. The damping is set up to keep wheel contact through the bump stroke when the car is being pitched hard, which is the part most generic lowering kits miss. The result is a setup where the driver makes the controlling decisions, not the dampers.

Fitment for the Cmc J Space (2024-2026)

This coilover is built specifically for the Cmc J Space CM01 chassis on the OE Lower 30mm spec, covering the 2024-2026 build range. Confirm your chassis code matches CM01 before ordering – Drift Spec damping is calibrated for this platform’s weight and geometry and should not be cross-fitted to other variants.

What buyers also search for

• Cmc J Space drift coilover for competitive use
• CM01 chassis suspension upgrade with 30mm OE lower spec
• Cmc J Space coilover kit with monotube damping for drift events
• 2024-2026 J Space lowering setup that keeps the rear predictable at angle
• Drift-spec damping for the CM01 platform over OE shocks

Configure your Drift Spec coilover spec for the J Space below and lock in the build that suits your driving style.