XYZ Racing Hollow Front Brake Kit — Alfa Romeo GT (EXCLUDING 3.2 CC) (2003-2010)

The Alfa Romeo GT’s factory front brake specification reflected its platform origins rather than its intent: a Bertone-styled 2+2 on the 147 and 156 underpinnings, fitted with conservative single-pot sliding calipers across the 1.8, 2.0 JTS, and 1.9 JTD variants. Without the 3.2 V6’s larger front assembly, owners of the four-cylinder and diesel cars were working with hardware specced for measured commuting, not for the roads this shape was drawn to cover.

This XYZ Racing front big brake kit closes that gap, upgrading stopping capacity at the front axle for 2003-2010 cars. A matched pair of larger discs and four-piston calipers replaces the factory single-pots.

What this brake kit does for your 2003-2010 Alfa Romeo GT (excluding 3.2 CC)

On a fast B-road or a circuit infield the stock GT’s front brakes can limit what the chassis offers before the car runs out of composure, particularly in the 2.0 JTS, where the engine’s appetite for revs encourages you to carry pace into braking zones the factory single-pots manage only just. The hollow-body caliper cuts unsprung mass at the front corner, a meaningful gain on the GT’s MacPherson-strut front axle, where lower unsprung weight sharpens the wheel’s ability to track through compressions without adding kickback through the steering. Larger discs with hollow-vane cooling give the thermal headroom that keeps repeated hard stops consistent instead of progressively fading. Two-piece floating discs let the rotor grow with heat without warping against the bell.

Three pad compounds cover how you drive. Street is the quiet, low-dust default for everyday miles. Sport adds bite and heat range for fast-road use and occasional track days. Racing handles sustained circuit sessions. Discs are drilled or slotted at the same price.

About the Hollow Front Big Brake Kit

The caliper is a hollow-body forging as standard, reducing unsprung mass over a conventional caliper of equivalent capability while promoting airflow through the disc body to manage heat under hard braking. At the GT’s front axle lighter corners improve ride compliance over broken surfaces and sharpen steering response at corner entry, both of which matter on a front-drive coupe where front loading already does heavy work during corner entry and trail-braking. For sustained circuit use, the optional Hollow Racing caliper deletes the dust cover, is rated to 1000C, and carries a two-year warranty.

Calipers are painted in Red, Yellow, Gold, Black, or Anodized Black at no extra cost. A Custom Color in any Pantone shade is £150. Premium polished-forged finishes come in Titanium, Polished Gold, and Polished Silver, with candy finishes in Teal, Blue, Red, and Orange, for owners matching hardware to a specific wheel finish. Centre bells can be upgraded to a two-tone anodized finish in five colours or to titanium, and braided lines firm the pedal. This kit covers the front axle as a matched pair, and everything is selectable above when you order.

Fitment for the Alfa Romeo GT (excluding 3.2 CC) (2003-2010)

This front big brake kit is built for the Alfa Romeo GT from 2003 to 2010, covering the 1.8, 2.0 JTS, and 1.9 JTD-engined variants and supplied as a left-and-right pair. The 3.2 V6 is explicitly excluded: that variant runs a different front brake specification from the factory and is not covered by this kit. Confirm your engine variant and model year before ordering to ensure correct front hub compatibility.

What buyers also search for

• Alfa Romeo GT front brake upgrade for road and circuit use, 2003 to 2010
• Alfa Romeo GT big brake kit with Street, Sport, and Racing pad compound selection
• Alfa Romeo GT 2.0 JTS and 1.9 JTD stopping upgrade over factory single-pot calipers
• Front disc brake kit for Alfa Romeo GT with caliper colour choice
• Alfa Romeo GT brake kit for four-cylinder and diesel variants, excluding 3.2 V6

Select your pad compound, disc style, and caliper colour from the options shown above when you order.