
XYZ Racing Hollow Front Brake Kit — Audi Q5 QUATTRO 8R (2008-2017)
SKU: XYZ-BRK-BKF-AU-18-C-FRONT
- IncludesFront axle pair (2 discs + 2 calipers)
- PositionFront
- Disc Ø330–444 mm
- Caliper pots6 / 8 / 12-pot
- Lead time10–15 working days
Fits Audi Q5 QUATTRO 8R (2008-2017)
Added to basket ✓
Caliper render for this kit:

The Q5 8R arrived from the factory with brakes adequate for the task Audi assumed most owners would put them to. Carry nearly 1,900kg of quattro AWD down an alpine descent, or take it onto a track day where braking zones arrive quickly after a longer straight, and the thermal limits of the standard setup become apparent in the pedal. Heat soak in the front discs and pads is the failure mode: repeated hard stops with insufficient recovery time produce the progressive fade that makes experienced drivers nervous.
The XYZ Racing front big brake kit addresses this at source. It fits as a matched pair of front calipers and two-piece floating discs for the left and right of the front axle, with three pad compound options and a wide range of caliper finishes selected at order.
What this brake kit does for your 2008-2017 Audi Q5 QUATTRO 8R
The 8R’s relatively high centre of gravity amplifies weight transfer under braking, loading the front axle hard from the first application. Greater swept area at the front means more surface to work that energy through before fade sets in, and the 3.0 TDI and 3.0 TFSI variants in particular generate enough vehicle speed that the braking energy demands are genuinely significant. The hollow-vane discs pull heat out of the friction face faster than the solid factory rotors, while the two-piece floating construction lets the disc grow with temperature without distorting and shaves rotating and unsprung mass off the front corners. Braided lines are included, sharpening the pedal by removing the swell of ageing rubber hoses.
Three pad grades cover the working window. Street is the quiet, low-dust compound for everyday road use. Sport adds bite and heat range for spirited fast-road driving and the occasional circuit lap. Racing is a track compound that needs sustained heat to reach its best, the right choice only with consistent hard use to match. Caliper finishes sit cleanly behind larger-diameter alloys without looking like an afterthought.
About the front brake kit
This is XYZ Racing’s front-axle upgrade for vehicles where OEM specification leaves headroom to improve under load. The calipers are hollow-bodied as standard for strength without excess weight, with an optional Hollow Racing upgrade for sustained track use that drops the dust cover, is rated to 1000C and carries a two-year warranty. The kit is configured to the Q5 QUATTRO 8R’s fitment requirements and built to your chosen spec at production, targeting the axle carrying the greatest deceleration load on a nose-heavy SUV platform.
Included painted caliper colours are Red, Yellow, Gold, Black and Anodized Black at no extra cost. A Custom Color in any Pantone is available, alongside premium polished-forged Titanium, Polished Gold and Polished Silver, and candy Teal, Blue, Red and Orange. Discs come drilled or slotted at the same price, and centre-bell upgrades, two-tone in five anodized colours or in titanium, are selectable at checkout.
Fitment for the Audi Q5 QUATTRO 8R (2008-2017)
This kit covers the Audi Q5 QUATTRO in the 8R generation from 2008 through to 2017, spanning both the pre-facelift cars and the revised models from 2012 onwards. The 8R ran continuously across this period as the complete first-generation Q5 production run. Verify your variant’s OEM front brake specification before ordering to confirm compatibility with the kit’s caliper and disc dimensions.
What buyers also search for
- Audi Q5 8R front brake upgrade for fast roads and track days
- Q5 QUATTRO 8R big brake kit with Sport and Racing pad compound options
- XYZ Racing brake kit for Audi Q5 2008-2017 with a full caliper finish range
- Audi Q5 8R brake fade solution for 3.0 TDI and 3.0 TFSI variants
- Front big brake kit sized for first-generation Audi Q5 QUATTRO kerb weight
Choose your pad compound and caliper finish from the options above, and we build the kit to suit.
What’s in the kit
Front axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 330–444 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 6 / 8 / 12-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 286–380mm (front). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
-
More XYZ products for the Audi Q5 QUATTRO 8R appear here as the rest of the range publishes.