
XYZ Racing Hollow Front Brake Kit — Rolls-royce PHANTOM (2017-2026)
SKU: XYZ-BRK-BKF-RO-002-FRONT
- IncludesFront axle pair (2 discs + 2 calipers)
- PositionFront
- Disc Ø380–444 mm
- Caliper pots8 / 12-pot
- Lead time10–15 working days
Fits Rolls-royce PHANTOM (2017-2026)
Added to basket ✓
Caliper render for this kit:

The Series VIII Phantom, Rolls-Royce’s first car built on an all-aluminium spaceframe, is the heaviest production vehicle Goodwood has delivered in the marque’s history. At somewhere north of 2,500 kilograms, the front axle takes the brunt of high-speed deceleration, and on a car that regularly covers ground quickly across continental motorways or UK A-roads, the factory braking hardware works hard to earn its keep. The XYZ Racing front big brake kit pushes that capability further.
This is a front-axle kit, a matched pair of front calipers and two-piece floating discs with braided lines included. Three pad compounds cover the actual spread of how Phantoms are driven. Most buyers will land at the Sport end; the Racing compound exists for a smaller group of owner-drivers who extend the car into sustained high-speed or circuit work.
What this brake kit does for your 2017-2026 Rolls-royce PHANTOM
The hollow construction reduces rotating mass on the front axle, which on a vehicle of the Phantom’s weight has direct consequences for how hard the suspension geometry and wheel bearings work under braking loads. The thermal benefit follows from the reduced disc mass: a hollow-vane rotor dissipates heat at a different rate across repeated hard stops, keeping the pad-to-disc interface in its operating range for longer at speed. The two-piece floating disc keeps the friction ring true as it expands, and braided lines hold the pedal firm where rubber would swell. Caliper colour, Red, Yellow, Gold, Black, Anodized Black or a Custom Pantone, carries genuine visual weight on the Phantom: the large-diameter wheels open significant space behind the spokes, and a Gold or Custom-matched caliper against a Black Badge or bespoke-commission car is a specification decision, not a cosmetic afterthought.
About the Hollow Front Brake Kit
The hollow construction is the kit’s defining engineering choice: the caliper is a hollow-body design as standard, bringing down weight without sacrificing the rigidity the disc must maintain under lateral load mid-corner. On a car of the Phantom’s mass, even modest reductions in unsprung rotating weight influence how quickly the front axle responds during braking transitions. For owners putting the car into circuit conditions, the optional Hollow Racing upgrade deletes the dust cover, is rated to 1000C and carries a two-year warranty.
Pad compound is chosen when you order: Street for routine and chauffeur-cycle use, Sport for fast-road owner driving, and Racing for circuit conditions. Caliper finish is selected at the same point. Included colours are Red, Yellow, Gold, Black and Anodized Black at no cost, with a Custom Color in any Pantone available, plus premium polished-forged (Titanium, Polished Gold, Polished Silver) and candy (Candy Teal, Candy Blue, Candy Red, Candy Orange) finishes above those for buyers working against a specific bespoke exterior colour.
Fitment for the Rolls-royce PHANTOM (2017-2026)
This kit covers the current Phantom generation, the Series VIII architecture introduced in 2017 and running through to 2026. The Series VIII spans both standard and extended-wheelbase configurations; both fall within scope. Front axle only. Confirm fitment with your marque specialist before installation.
What buyers also search for
- Rolls-Royce Phantom front brake upgrade for high-speed motorway and fast-road use
- XYZ Racing Hollow front brake kit for Rolls-Royce Phantom Series VIII 2017 to 2026
- Rolls-Royce Phantom Racing pad compound brake kit for circuit and sustained high-speed applications
- Rolls-Royce Phantom caliper colour options including Gold and custom bespoke finishes
- Rolls-Royce Phantom brake kit with selectable Street, Sport, and Racing pad compounds
Discs come drilled or slotted at the same price, with two-tone anodized or titanium centre-bell upgrades selectable at checkout. Pad compound, disc style and caliper colour are all configured when you order. Select yours from the options above.
What’s in the kit
Front axle kit — supplied as a complete bolt-on assembly.
- 2×Two-piece floating discs — 380–444 mm: you pick the exact diameter with the "Disc size" option
- 2×Lightweight aluminium centre bells
- 2×Forged aluminium calipers — 8 / 12-pot
- 2×High-stiffness mounting brackets
- 2×Braided stainless steel brake lines
- 4×High-performance brake pads (1 set)
- 1×Fitting hardware & tools pack
Choosing your spec
Every kit is built to order around the choices you make above. Here is what each option actually changes, so you can spec yours with confidence.
Brake pads — Street, Sport or Racing
Every kit ships with a full set of high-performance pads; the compound is your call.
Street is the right default for fast-road driving — a strong, progressive cold bite with low noise, low dust and long disc life. Sport raises the working temperature and adds bite and fade resistance for hard road use and the occasional track day, while still behaving on a cold morning. Racing is a track compound built for sustained abuse: huge fade resistance and bite once heat is in it, at the cost of more noise and dust when cold. Match the pad to how hard you actually use the brakes — there is no benefit to a race pad that never gets up to temperature.
Caliper grade — Hollow vs Hollow Racing
Hollow is the standard caliper on every kit: a hollow-body forged caliper, lighter than a solid one, fitted with a dust cover and backed by a 5-year oil-leak warranty. For most fast-road and spirited track use it is all the caliper you need.
Hollow Racing is the track-grade upgrade. It runs the same hollow body but without a dust cover (so there is nothing to melt at sustained high temperature), uses a twin-metal piston that isolates heat travelling from the disc to the oil seal, and is rated to 1000°C. Available 286–380mm (front). Warranty is 2 years on oil leaks and 10 years on appearance. Built for professional racing and repeated track days.

Caliper colour & finish
Painted colours (Red, Yellow, Gold, Black, Anodized Black) are included at no cost. Want an exact match to your car? Custom Color (+£150) paints the calipers to any Pantone code you supply (15–20 day lead time).
Polished Forged finishes are the flagship: a forged caliper given a mirror-polished surface treatment that shifts colour with the viewing angle. Beyond the looks, the polished surface dissipates heat better, resists rust and stands up to the weather. Choose Titanium (neochrome, +£350), Polished Gold (+£300) or Polished Silver (+£250). They look their best paired with a titanium centre bell. Care: clean only with a dilute neutral cleaner or water.
Candy colours (+£200) use a deep candy-paint and polishing process for a mirror-reflection, boutique finish — pick Teal, Blue, Red or Orange (shown below right).


Centre bells
The centre bell is the CNC-machined aluminium hat that joins the disc to the hub. The standard anodized centre bell is included. The Two-tone bell (+£200) adds an anodized accent ring — choose Red, Yellow, Orange, Purple or Silver right here at checkout. The Titanium centre bell (+£500) is a forged titanium bell (bolts not included) that finishes off the polished-forged look.

Other products that fit this vehicle
Front & rear brake kits, coilovers and more for this car
