XYZ Racing Street Advanced Coilovers — Luxgen S3 2016-2026

The Luxgen S3’s LU04 platform left the factory tuned for comfort: soft damping, a generous ride height and the kind of body roll that a front-drive compact saloon carries when you load the outside front tyre mid-corner. That softness is fine for the commute and tiring the moment you start driving the car as the chassis allows. This is where the XYZ Racing Street Advanced coilover earns its place.

The Street Advanced is the road-and-track member of the XYZ range, and on a platform as thinly served by the aftermarket as the Luxgen S3 it is one of the few credible ways to take real control of ride height and damping. Set it soft for daily Taiwanese B-roads, firm it up for a track day, and keep the same kit doing both jobs.

What these coilovers do for your 2016-2026 Luxgen S3

Drop the S3 onto a sensible ride height and the centre of gravity falls with it, which immediately calms the roll and pitch the standard car suffers under braking and turn-in. The 720 levels of damping adjustment let you tune the front and rear away from the soft OEM compromise: enough body control to stop the nose diving into a corner, without hammering your spine on a rough surface. Height adjustment also lets you set wheel-to-arch gap and corner balance to taste, so the car sits how you want rather than how the factory shipped it. The result is a Luxgen S3 that turns in sharper, stays flatter through a bend and tracks more honestly under load.

About the Street Advanced coilover

XYZ Racing’s professional team developed the Street Advanced over several years, refining the valving against feedback from races around the world before settling the specification. The brief was deliberately broad: a single kit that works for normal road driving and for track-day use, rather than forcing owners to choose. Central to that is the 720-way damping system, which gives a wide enough spread of settings to suit everything from a comfortable daily commute to a hard session on circuit. XYZ positions it as essential kit for drivers who want more speed and tighter control from their car, and on a compact saloon that handling gap is exactly what the Street Advanced is built to close.

Fitment for the Luxgen S3 (2016-2026)

This kit is built for the Luxgen S3, chassis code LU04, across the full 2016 to 2026 model run. The SKU (XYZ-COIL-LU04-SA) is matched to that chassis, so it bolts in without the guesswork that plagues a platform with so little dedicated aftermarket support. Confirm your build year falls inside the 2016-2026 span before ordering.

What buyers also search for

• Luxgen S3 coilover suspension upgrade for road and track use
• Luxgen S3 Street Advanced 720-way damping for daily and track-day driving
• Lowering the LU04 Luxgen S3 with adjustable ride height
• Coilover options for the Luxgen S3 where the aftermarket is otherwise thin
• Firming up the soft OEM Luxgen S3 suspension without losing comfort

Pick your damping and ride-height settings and configure yours below.